3/4" Adjustable Pimp Clamp - 56-K3/4" Adjustable Pimp Clamp
Uses 3/4" pipe as bar, to which foot is screwed on regular pipe threads. Head automatically grips bar at any point by Multiple Disc Clutch, which permits instant adjustment to fit the work. With both heads "reversed", can be used to "push", or spread work from the inside. No machine work required to assemble, no holes to drill, no notches, no rivets. The screw is cold-drawn steel, 5/8" diameter, 2-1/2" from edge of bar. Clutch discs are hardened steel, and castings are best malleable iron, baked enamel finish. "Extra-heavy" black pipe is recommended for these Fixtures. One ``set" makes one clamp.
PRODUCT FEATURES
- Fixed head can be "reversed" and clamp can be used as a spreader
- Sliding head operates smoothly with the 5/8" Adjusting screw for final tightening and Multiple-Disc-Clutch for secure hold along pipe
- Coil spring stop
PRODUCT SPECIFICATION
- Width(in): 9
- Height(in): 8.25
- Length(in): 12.13
- Weight(lb): 2.62
- Estimated Cubic Size (cu in): 112.58
