Delta Machinery 1" Belt / 8" Disc Sander - SA180

Delta ShopMaster Model SA180 1" Belt/8" Disc Sander with a 1/3HP, 1725 rpm, 120V induction motor and controls; miter gage, 1" X 42" 100-grit belt, 8" diameter, 60-grit disc and instruction manual.

Product Features

• 3000 SFPM belt speed is ideal for metal grinding, deburring and sharpening, as well as sanding and buffing jobs.
• 8" diameter disc operates at 1725 rpm for finishing hard and soft woods, plastics, composites and more.
• Tilting cast-iron tables on belt and disc units are slotted for miter gage use.
• Factory-set belt tensioning and one-knob belt tracking for accurate operation.
• Built-in, 1 1/2" I.D. dust spout for adaptation to a dust collection system or shop vacuum.
• The narrow belt width is ideal for sanding odd-shaped pieces. Steel platen is removable to facilitate working with curved pieces.
• Belt cover is removable for access to the idler wheel when performing contour sanding operations.
• Compound angles can be achieved on both units by tilting the table and utilizing the standard-equipment miter gage. Miter gage turns and locks for common angles 45° left and right.

Product Specifications

• MOTOR
  • 1/3 HP
• MOTOR CONTROL
  • Toggle switch with removable lock out key
• SPEED
  • Belt: 3000 SFPM (914 SMPM)
  • Disc: 1725 rpm ABRASIVE BELT
  • Length: 42"(1067 mm)
  • Width: 1"(25 mm)
• DISC DIAMETER
  • 8"
• TABLE SIZE AND TILT
  • Belt: 6 1/8" X 7 1/8", tilts 45° out (156 X 181 mm)
  • Disc: 4" X 10", tilts 45° in and out (102 X 254 mm)
• DUST COLLECTOR OUTLETS
  • 1 1/2"(38 mm) Diameter
• OVERALL DIMENSIONS
  • Depth: 25 1/4"(641 mm)
  • Width: 15"(381 mm)
  • Height: 19 1/2"(495 mm)
• WEIGHT
  • 62 lbs. (28 kg)